Epoxy Kit Installation video... 5 Minutes long, teaches how to install dive stand bolts on an existing deck... quick and no mixing
Epoxy Kit Installation
Installation is quick-n-easy.... no mixing
Quick Reference Information
- Baja base requires (2) 1/2" bolt kits, one for base, one for springs
- Duro-Spring base requires the larger 5/8" bolt kit
- Techni-Spring Fiberglass base cannot be installed with Epoxy Kit
- The "new" T7 Dive System can be installed with Epoxy Kit
- 1/2" bolt epoxy kit requires 9/16" hole drilled 4 1/4" deep
- 5/8" bolt epoxy kit requires 11/16" hole drilled 5" deep
- Do not drill completely thru the deck or the epoxy kit hammer-capsules will not work
- Hammer Drill and Masonry Bits are recommended
- A can of compressed air is also recommended
Use this link to the installation instructions
Click the picture above to view a short 5 minute video showing how to install the 1/2" epoxy kit
Edge Dive Stand Swap-out video... 3 Minutes Long ... swapping out a rusted TechniSpring Stand.. no more rust!
Click here to see the Video
Water Stub-Up installation video.. 9 minutes long .. Install water stub-up on existing deck using a garden hose to excavate under the deck, quick-n-easy way for aftermarket intallations.
Quick-N-Easy Way to get water to your deck Click the image below and watch the 9 minute video Learn how to use a garden hose to tunnel under a deck, then how to core a hole, then plumb a water stub-up You won't believe how quick-n-easy it really is.
Click here to see the Video
Waterfall Scribing Video... 6 Minutes long... shows how to scribe rock waterfalls to match the coping, touch-up and much more.
Click here to see the Video